E=MC^2
[A simple perceptual concept for experimenters.]
Spacial Relativity
To understand motion and light does not take a degree, one only need observe the results.
There are two concepts one needs to experience, linear motion acceleration, and spin.
The space manifold is a spiral and causes accelerating objects to spin.
A car is more then enough for both concepts to become familiar.
Accelerate the engine and watch it try to spin, the engine will torque on its rubber mounts.
Take off fast in the car and feel the drag of space trying to slow you.
Inertia is a light speed relativity effect, in that as one alters their
motion through space, linear dimensions are effected on all our atoms.
What we feel is the shifting of the linear lengths from the spin of space opposing the change of velocity in our atoms.
We feel this as a pull in reverse of the motion, and it is not subtle
or theoretical. Space is like a screw and we spin through it.
Since our atoms are moving at near c they are effected more then we realize by small accelerations.
The cube on the left is stationary. The cube on the right shows the
effects to our dimensions as we increase velocity towards light
velocity.
We become thinner in the direction of motion, and start to expand out in the direction at 90 degrees to motion.
Acceleration forwards seems to be countered by an almost equal reverse
"pressure" and it literally compresses us in one dimension.
Our space bends, or, relative to our matter in motion it bends, getting squashed only in one dimension.
This can be studied in Einsteins Relativity.
Compression
In order to maintain a normal relative or unaffected geometry we need
to compensate in the other two dimensions setting at 90 degrees to
motion.
One method is to spin ourselves in this plane of motion, such that now velocity along the other two vectors is equal to forwards motion.
Now we compress equally in all dimensions, and accelerating is less disruptive to our body, reducing inertial effects.
Another effect is to spin only the nucleus of all our atoms where the weight is actually located. This is where the diamagnetic elements come in. ABCH [Aluminum, Bismuth, Copper, Hydrogen]
This might seem like a tremendous jump from complex Einstein formulas
to simply driving a car, but they are very much related.
Experiment with torsion devices in moving vehicles can teach the process and effects if one is aware of inertia.
The 7X GL
The copper 7X GL resonant rod is reactive to motion and pulls inwards on its ends in an acceleration.
If aligned properly it seems to lower inertial effects. If aligned wrong it increases them.
Rods placed running across the car side to side tend to lower forwards inertial effects.
Rods placed lengthwise from front to back of car tend to drag adding more resistance to forwards motion.
The effects are a direct function of the quantity, or "mass" of metals in vibration along those lines of motion.
If you want to aid the forwards motion reducing drag to changes of
motion, align the rods [up - down] and [side to side], or on any angle
along that spacial plane.
Very simple.
The effectiveness will be a function of how much of the cars mass you can get vibrating and coupled into the rods.
If you want to lower the resistance of the pistons to accelerating up and down, place the rods at 90 degrees to the piston line.
The Disc
The disc is the perfect shape to apply for "inertia countering" or "inertia dampening" motion through
space, as it spreads out in only two dimensions with equal lengths from
center, and leaves one dimension free for motion through space.
If the disc is a perfect 7X GL fractal, then you will compress all the
directions simultaneously. As the 7X is most interactive on its outer
segment it should create a bubble of displaced time flowing along with
you as you move 90 degrees to the discs surface. This is the basic UFO
design, and is very simple, once you have felt how a resonant rod can
effect inertia.
The discs sit horizontal while floating over the earth as the
acceleration of gravity is the main countering force. As they move
through space however they will tip or tilt such that motion is towards
either top or bottom of the craft. Free of the earths gravity they would be moving 90 degrees to the disc.
EM
Our current technology only sees the Electric and Magnetic fields for
the most part. Motion is assumed to be a constant response not
recognizing the elastic medium of space as compressible.
In all AC in copper wire however, you will discover that motion is
always at 90 degrees to both the E field [Electric] and the B field [M
Magnetic].
The pressure behind the actual motion, is not the Electric or Magnetic fields, but always found at 90 degrees to both.
Because we have no definition for the motional field in electronics, we
tend to believe the power is in the other two fields, and there is no
variable in the motional vector.
We multiply them together and believe this is always the power. However
at the power station the generators are being turned over by "pressure"
of either water or diesel.
This pressure travels down the transmission lines and is delivered to motors at 90 degrees to the E and B fields.
The medium this pressure rides over is the compressible fabric of
space itself, and is not as fixed as EM tech teaches us. It is elastic,
and thus when we use non sinusoidal wave forms it gives us back things
we don't always expect.
Because the phase is rolling on a power line at 60 Hz, when someone
gets shocked there are two possibilities. In the one case they get
burned by a flow of electrons. In the second case they will be knocked
clear with a powerful pressure
jolt. The chances of getting either type
of shock is about 50/50. The "pressure" is there in the AC power and it
uses "vibration" to propagate.These pressure effects are usually
released running from the positive voltage towards the negative
voltage, and with lightening this becomes apparent. Stand on a positive
charged surface with a HV negative DC electrode over you and you will
get a burn. Stand on the negative electrode and you will be knocked
backwards in the opposite direction of the electron motions. This was
probably why they used to believe electricity travels from positive to
negative. The punch that moves things is moving the other direction
from the electrons.
The current notion that power is lost if voltage and magnetic field
disappear is a major roadblock to the radiant energy events we see now
being discovered to actually work
There is another way to transfer energy and it may seem to amplify from
the matter of the devices themselves when configured correctly. It also
appears to be lossless if propagation is through crystalline metals.
Wilbert Smith gave us a name for this third field, T or tempic field,
and well defined its parameters. [I have not found any other concepts
predating this so believe he should be recognized for what appears to
be an original thought for humans, although he credits the Aliens for
the original information.] The kicker is that any "pressure"
generates a T field in the space around the object, and T field will
move through everything, dropping off at a longer range then Electric
or Magnetic field can reach. It is very much related to inertial
effects.
If you diagram an atoms electron field, and realize the motional
velocity of an electron is .9999......5 light speed, you may realize
that in a car moving at 60 mph the electron is now approaching light
speed closer on one side of its orbit and dropping lower on the other
side. The Proton spin is doing the opposite as it normally spins the
other direction. There is a relativistic effect, and this is very
probably related to inertia in space, which actually does warp the
geometry of the atoms and create internal pressure fields in space.
When we take off accelerating, we experience being pushed back in our
seat, and there is a delay until this force releases as the atoms all
adjust to the new velocity of spin in space.
Wilbert Smith
Wilbert states we can modulate this field, and with it bend the speed
of light within the envelope of the area effected. He also indicates
this is how UFO craft operate.
When one cancels the magnetic field by winding a coil in scalar
canceling mode the energy is not lost or canceled, it moves into the
tempic field and begins altering the light speed constant of space
around it. This effect is not very noticeable unless we start to trap
it into a circle, tube, or sphere and continue to pump it up, like a
basketball. There will be a layer of increased pressure inside. The
inside of the atom generates such a field to hold the electron shells
on, a field that both repels at one location and attracts at another forming spherical shells at fixed distances.
This is the diamagnetic field, and repels both ends of the electrons
shells magnetic polls equally.
Bismuth Scalar Coils
Copper is only pressure interactive when the voltage is changing, it is
not a good static device for TEM. Changing the duty cycle on a scalar
coil will produce small tempic field charges in space you can sense on
a bismuth core. To build up a static tempic field we
use devices like the Joe Cell where the waters diamagnetic field can
store the tempic field charge to a center core surrounded by rings of
pressure, or large tube devices of copper and iron layers. Pure "pressure" on the fabric of space. These are standing
waves of pressure. Joe cell tube gaps, where the water is located, must
fall between about 1/4" to 1/2" or there is a severe drop of the force
and the cell may not achieve stage 3.
On the atoms these pressure waves are moving the shell in and out at
very high frequency, most of the time these pressure waves do not
build up to a coherent vibration, but in devices like Hamel cones this
is the goal. When all the atoms of an Aluminum cone start to vibrate as
"one", the energy comes up and out of the materials and vibrates the
entire mass at a lower octave. This is the concept of light rods and the study of how to experience this effect by using accurately cut lengths.
In the Joe Cell the water reaches a state where the outside of the
atoms can freely move fast enough, that as the diamagnetic field rises from
the water it is able to become coherent. The nuclear vibrations connect
between all the atoms and the energy comes up into the cell, as a very
small voltage with a very powerful vibrating tempic field wave at a
very high set of frequencies. Around the cell can be felt these rings
of pressure on a lower octave, they are found to be inches apart. The same sort of pressure waves that
probably hold the electron shells in orbit and the moon in orbit.
T Field
Tempic field cannot be directly measured on EM meters, it is however
"sensed" at pineal gland very naturally. Some use finger tips with a
light touch, others can just feel them after a time of working around
them. Layers of the field can be palmed or sensed. Cold or hot sensations are common descriptions.
An AV plug can measure them if the field is pulled off center of the zero point or
background pressure level of space. A strongly charged large Joe Cell
will produce nodes along the tube leaving the top. On these nodes will
be an absence of EM noise floor. To each side of this node there will
be a standing pin point of EM, approx .01 volt. These electric nodes
are stationary, and can be calculated, they are each exactly the same
distance from the node.
For the AV plug see the magnetism site, and measuring equipment section.
Measurements
For study of the EM nodes
925 Hz
Here you can actually generate an electric field on copper rods in
water using specific lengths of tubing. This pretty much proves, the
length of a resonant rod can effect the natural galvanic voltage of a
copper rod in water if precisely cut on an EM node point.
If "field coherence" is a foreign concept you may want to scan these documents:
Spin Coherence
The Field Forces
All three of the fields can become coherent and rise up to become one
larger field. Just as magnetic domains all aligned properly can rise a
magnetic field to outside the matter, voltage on a wire can also, as
can tempic field. The tempic field shape is however a layered field,
generating the rings that hold orbital positions. We can learn to raise
these type of fields also.
Dave L
c_s_s_p group
Credits and References
Most of my understanding of Wilbert Smith, density of the space fabric, longitudinal Tesla waves, platonic vibrational physics, were the efforts of Dell Coleman, and Andrew Bellon
of c_s_s_p group. Much thanks to both of these members, as a complete
overview of both Smith and Tesla is probably a prerequisite to
understanding what is happening when you start playing with torsion
devices.
Without this prepration one may not recognize what they are observing at all.
Warm regard to Tony Geron of
c_s_s_p group , his vibrational art forms, and also T shirt patterns
have been an incredible inspiration. Reflected Light can in fact
produce vibrational fields, and Tonys work is a standing testament to
this. I keep waiting for the levitation T shirt..... I have no doubt it
will be comming!
Tony Gerons Web Site
Check out the Cafe Press Shops [left of the page] for one
of Tonys T Shirts if you want an experience!
Einstein - Special Relativity
John Ernst Worrell
Keely - Vibrational Energy
Buckminster Fuller - Platonic Vibration
Levitation Site