Protonics
[This model was offered to begin to explain the diamagnetic field and
placed it in the wrong place, the Proton. The Neutron was eventually
understood to be the source of the diamagnetic field and the strongest
Tempic field effects. This model still contains many valid observations
as to mistakes found in the classic diamagnetic explanation to date.
Some experiments have now begun to reflect the "cold energy"
perception, and the diamagnetic field is observed to radiate at 90
degrees to the Protons magnetic field.
This model will be removed at some later date when a more clear perception is attained.]
In my first paper and study on the forces of nature present
in
the universe, I touched on this principle of cold electric energy
or
Protonics.
It would seem that now we stand on the brink of discovering
this new world of energy transfer via the Protons shell. Proton energy
is easily tapped using the high nuclear magnetic materials, Copper,
Aluminum, and Bismuth. I believe that the field of Protonics
will
be the greatest discovery of the 21st century and completely change the
way we think of and interact with the world.
Electronics -
The study and
mastery of the nature of the Electron shell, using it to move
energy
from point to point mainly with free Electrons and radiation of photons
in the "medium" formerly referred to as "free space" or the "Either"
and the magnetic field. The equations are abundant for Electronics and magnetism as related to "c" or the present model of light speed.
Protonics -
The study and
mastery of the nature of the Proton shell and how energy is moved
through it as it sets in the strong force area of the atom, and
propagates energy through the "scalar background medium" that lies
under or behind "free space" in a higher density with a faster time
flow rate using the diamagnetic
field.
The equations for Protonics are totally absent to the engineer at
present and the scalar devices are little understood as well as the
speed of propagation being 1.5708 to 1.618 higher then "c".
Diamagnetics
- Study of the
nature of Proton diamagnetism which always provides a repelling force to
an Electron magnetic field. Diamagnetism is linked to motion [torsion
or spin] and is not a constant force but is altered by motion. This has
been missed by most classic explanations of diamagnetism which claim
diamagnetism is the result of Electron interactions and is a very weak
force. Diamagnetism is seen to shoot pieces of Aluminum at "bullet or
projectile speeds" it is only a weak force in a stationary magnetic
field but becomes a very
strong force in the presence of a moving magnetic field.
Equations to describe this hidden force relating torsion to diamagnetic
force in various materials are presently missing from our
primitive technology.
After my own research into diamagnetism
I am truly appalled by the classic definitions of this force which may
hold one of the keys to over unity. In the materials Copper, Aluminum,
and Bismuth consulting an NMR chart will quickly reveal the nature of
diamagnetics is the high magnetic moment of the Proton field and has
little if anything to do with Electrons which always seek attraction to
external Electron magnetic fields.
As the Proton sits in the strong force area of the atom where mass is
reduced, and thus gravity is lower, we will have to account for more of
the forces as we begin to understand manipulating it's fields. Tom
Bearden warns of the dangerous nature of the "conjugate waves,"
supposedly moving backwards through time. Tesla however did not believe
in time as a dimension and strictly held that all is motion in the
Either or the background "Medium". Wilbert Smith seems to
agree
with Tesla on this and describes the world as based solely on "spin"
and altered "time flow rates." Everything moves through time, but not
at the same rate. Gravity lies in the difference. I am now forming a
model with two levels of Aether that lie is slightly different
densities, and therefore the energy propagating in each one does not
interact.
On Entrophy and Awareness
"Entrophy is a state of negative mind, an illusion. "All is motion, and
motion can not be stopped at the deepest levels of matter." This is a
true Law of nature. "Nothing comes to rest, ever". "All is change, and
change is constant." There is no such thing as an "isolated system,"
all systems composed of atomic particles are connected to forces we can
not at present understand, all atomic particles move through
transitions of dissapearing and reapearing in this realm. Consciousness
must slide deeper to realize these truths. Awareness is not fixed so as
to be able to determine exact truth for all. A scientific model needs
to accept this parameter. This is opened ended science, one that
accepts it's present understanding is not a "law" but is fluid, just as
reality is fluid to the level of awareness achieved." "Experiments
involving Awareness or Consiousness do not produce consistent results,
yet they should not be dissmissed for this reason alone, but awareness
must itself become a varible of the experiment."
Myths
The myth of "reverse time flow waves" in the Proton or Electron shells,
and the myth
of the "scalar field" will be hard to dispel. Observing the nature of
the "scalar waves" in the Electron shell and how they interact with the
Proton layer one comes to a slow realization that the energy of a
scalar canceling winding on a coil does not actually cancel the
energy present in the magnetic field but simply pushes it through to
the deeper Aether medium of the Proton layer.
It is through the scalar canceling magnetic field that the energy is
transferred from
the Electron layer to the Proton layer. Energy is not lost or created,
it is transferred between these two atomic layers through the magnetic
field that couples them together in the never ending dance of the atom.
We may get confused by this transfer and make up alternate models of
"reverse time flow waves", "scalar fields", Electron scalar
canceling fields, or potential
scalars without motion or vector, to try and explain the
observed phenomena,
however sooner or later the truth will be realized. I believe that
there
is really no such thing as a "scalar field" in the most exact
interpretation of the term, without a "vector" and a "scalar" there is
really nothing at all, no force. I also believe that all the forces
holding this reality together travel through time with us, not
backwards, and thus no force is lost. Wilbert Smith gave us a model of
tempic vector, voltage vector, and magnetic vector, with "spin" and
only "spin" being the one thing all awareness can agree upon. There is
no such thing present in the universe as a potential having no motion,
because at the roots of all matter at the smallest places of existence
all is spin, and all is in motion and this is the root of time flow.
This is nature. The voltage vector, the second dimension, cannot exist
without the tempic vector, the first dimension it is built upon.
The energy from a scalar canceling magnetic field does in fact go
somewhere real. Because we have not found an adequate name yet for the
medium of energy transfer that seems to bypass the conventional EM path
through space we resort to models of two static forces propagating
through the same space but do not interact with other EM fields.
The true nature of the "scalar canceling field" and Density
Study of the scalar canceling coil tells us that the Electron magnetic
field can totally
disappear from view
in the normal sense of power
transfer that we are used to monitoring and then pop up at a remote
location set up to receive this energy. It seems to bypass the normal
Electric current, voltage, and
RF energy which can be intercepted with a Faraday cage and has been called [tunneling]. We felt that
there must be a hidden
medium and started to develop models to try and explain
this just like the first Radio engineers. The presence of a mysterious
scalar canceling field,
which cannot be measured, yet is present because we can transmit and
receive it across space and even through objects, as though the energy
were somehow leaving our known universe and reemerging around it. Tesla
observed this as a stinging on his skin with high voltage surges, the
energy which could jump through glass shields when the switch was
thrown and he recognized it was not normal electricity.
On Tesla
Tesla indicated it was the Either, the "Medium" through which these disappearing
forces traveled. Tesla
clocked the transfer "medium" speed for the "stationary ground wave" at
471,240 Km /sec and the speed for the Electron transfer medium at
300,000 Km / sec. [Tesla patent 787,412]
Although the patent indicates he did not believe this to be a space
propagating wave but moving through the earth directly, at faster then
light speed. He presents this wave as being like a standing wave
found on an antenna, only moving directly through the earth and not in
the air or free space. He later describes this as a spiraling energy
from a center zero point, and his coil designs in this patent were
apparently based on this model. His descriptions have been compared to
a "longitudinal" wave and now many words have been added to our
alternate energy vocabulary. Tesla wave, longitudinal wave, scalar
wave, cold electric wave, some are not proving to be particularly
accurate, however the terms all point to the same principle. A wave
generated by the Proton medium traveling faster then light through an
alternate medium of transfer where there is no degradation of the
signal strength across space.
It should become apparent the Proton
energies travel through a
different medium then the Electron energies. One that lies in a
different density where relative to us time flow rate is higher.
Tesla left us the actual speed differential. Tesla's longitudinal waves
left a charge in any metal objects for a great distance around the
field generator, it was not balanced but produced an offset voltage
because it did not equalize the Electron and Proton energies perfectly
as a true scalar canceling potential. His own description of this was a
"disrupter." He utilized the fast "impulse" of only the Electron energy
to create the effect.
Tesla also made some of the same observations about this
form of energy
"Protonics" as I have rediscovered. The sensation of "physiological
heat", "pressure" or torsional forces and at his high levels of energy
even pain and the vibration of objects. At higher frequencies the
presence of white light filling the room.
Connecting the
models
I have recognized that
there are really two "Mediums" present
in the operation of the atom and not merely one. Energy can move
between them, but it does not "cancel." The scalar coil is a transfer
mechanism
for bouncing energy between the two "Mediums" or alternate "Densities". The true
vehicle is the magnetic field which is the only field that can span
both "Mediums". The B field as it sets between the Electron and the
Proton that share a B vector and illustrated in the Time Vector Model of Magnetism.
Actually there are two tubes the B field
uses to connect between Electron and Proton, one is a result of
particle rotation and the other is the result of orbital motions. It is
the interaction between these two tubes of magnetism that transfer
energy into or out of the so called scalar transfer medium, setting in
an alternate density. Scalar
waves are actually longitudinal pressure waves of some sort,
probably with both scalar and vector, in the Aether
medium
that lies at a deeper level
then the space transfer medium of the Electrons EM fields formerly
called the "Either". The
time flow rate differential is 471,240 / 300,000 = 1.5708 [Density
Proton / Density Electron] Time flow Rate [Aether medium ratio].
This is slightly different then the predicted 1.61803399 from the
phi density model, however the difference [0.04723399] is less then 5%.
EM travels through the spacial medium colliding with anything in its
path and forming interference patterns. The background medium is the
deeper Aether, and Protonics is the method of propagation not
Electronics, or at the least an interaction of the two. The Protons
energy transfers are in the Aether and seem to
move around or behind the spacial fields and the normal Electron
channels of what we now call "free space" and at an increased velocity
seemingly impossible from our "Einstein point of view" about
light speed being the constant of the universe "c." Tesla already
showed us the true nature of "Density"
and "Time Flow Rate."
The forces connected with the Electron spacial fields are Radio RF,
Voltage, and Magnetism, while the forces connected with the Aether of
the Protons world appear to be similar, in the "interaction" we
find Gravity, Time Flow Rate, added to the list, and
all the
other "strong force" energies we may discover along
the way such as a time
sheer spherical field, or the basic UFO field, which is
modeled as an enlargement of the strong
force area of the atom itself.
The properties of the Proton "medium" are not clearly understood at
present, however they will be as Protonics
develops.
The two particles, Electron and Proton, inside the atom sit in
different "mediums" or
Aethers in slightly different densities. The Aethers do not interact
directly, and Electron signals can move right past Time Flow Rate
vibrations ignoring one another, just as Gravity can move right through
a magnetic field and not effect the magnetic field in the
least.
There is no interference pattern resulting in the crossing of these
very different kind of fields.
Our physical universe seems to lie in the crossing of two Densities or
two realities of substance, the Electron is grounded in one and the
Proton is grounded in the other. They
are coupled through a magnetic
field that spans both. On one end of the field, Electron,
we find our
normal background Zero Point, with its relative Gravity and time flow
rate, and on the other side we find a slightly lower Gravity and a
higher time flow rate grounded in another Zero Point and forces in
operation that bypass the outer medium..
Energy can be transferred through either "Medium" as has been now shown
with the scalar coil, and it can be moved between them, but it is not
canceled or lost. The human does
have means to experience both mediums and make a clear
identification.
Regenerative effects of the Proton Medium
The Protons Aether medium, or more dense space, is not the same as our
normal EM space. In the Vortex generator we find two Protonic fields
interacting off an Electron scalar canceling coil like a mirror through
the coupling magnetic fields. The Bismuth's diamagnetic energy is
bouncing off the Magnetic canceling Electron layer of the Copper coils
windings and back into the Coppers normally inductive Proton layer and
also into the Aluminum Proton layer. The
two inductive elements do not fight or lower one another as with normal
inductance of the Electron interaction with it. The Protons two motions
of magnetism are not opposite like the Electron but both spin the same
direction and both materials have a different "spin" property. There is
an increase or
slow building of a 3' field that appears in the interaction, but this
field seems to lie in the Protons Aether and not in the Electrons
Aether. It
does not deflect a compass or interact electrically.
This does not mean
it is a "scalar field", the field has real forces coupled to it, and
they do not cancel. They merely do not interact with normal Electron EM
fields, as Gravity does not interact with a magnetic field. The field
produced in the Proton Aether of the Rain Maker vortex generator is
"balanced" and does not create voltages in all nearby objects like
Tesla's disrupter field generator, but it does produce the perceived
heat sensation very intensely and very constantly, not as "impulse"
events when a switch is thrown, but a constant spherical shaped field.
It also interacts with "intention" or the will of the person setting
within it.
Another observation stated by many who play with the Scalar cancelling
waves, or what is now referred to as the Longitudinal wave "T wave"
[Tesla wave], is that there is no loss when they propagate due to
heating of the medium as with EM that drops off as it travels. This
kind of wave is then well suited for a "no loss" type of oscillation.
Also we have the examples of Searl, Hamel, and Floyd Sweet to indicate
a regenerative effect is possible in the inductive metals without the
transmission of EM fields into nearby metal objects. I believe that
correctly identifying and removing the mysterious descriptions of these
interactions is the beginning to understanding them and gaining a
useful model.
Clearly identifying that the two transfer "mediums" are not the same,
is
a first step. Beginning to understand the deeper one will
bring the
mastery of Protonics, Gravity and altered time flow rates, and possibly
even density travel or UFO propulsion systems.
Diamagnetic regeneration
Copper[wire], 3/2 Proton spin, magnetic moment 2.87549
Aluminum, 5/2 Proton spin, magnetic moment 4.30869
Bismuth, 9/2 Proton spin, magnetic moment 4.54440
The idea of diamagnetic
regeneration
is using a scalar coil to cancel the Electron interactive magnetic
field, which then acts as a mirror to bounce energy between two
diamagnetic materials with different spin qualities to form a building field
in the Proton Aether. If the energy crossing becomes strong enough then
one layer of the the scalar coil can be opened to tap the Electron
Flows by isolating them with diodes and reclaiming both flow directions.
Due to the short field reach of the diamagnetic field [Proton field]
layering must be used to increase the 90 degree field offering the wire
a close proximity to the diamagnetic material. The scalar canceling
element is a
multi layered coil using layers of the dissimilar materials alternating
with copper wire layers which are scalar
wound and shorted
at each
layer for maximum Electric field cancellation in each layer offering a
very low resistance.
The energy transfer is controlled along the 90 degree field which pops
out of the active scalar coils. Either strong magnets can be used or a
ring of iron core electromagnets to set up the flow direction field for
inflow or outflow, or a combination of both along the outer ferrite
ring. It is hopped that as the Proton field builds, oppositely moving
currents in one of the scalar coils will be at a frequency coherent
enough to tap with diodes such that only this layer of the coil will no
longer cancel the Electron magnetic field. Determining the correct
layering for each material is the challenge as well as where to
introduce the iron layers which have been shown to be necessary for the
flow to begin.
Layering presents construction challenges but the increased diamagnetic
effect should be well worth the efforts as this effect will be directly
related to the area covered in the small distance where the diamagnetic
field is located very near the active materials used.
Observed Phenomena
The first observation I made as to the Proton Aether medium are that a
stationary field may form as a spherical
shape standing in space with
the same motion as when the field was created. Since the field has form
and can be felt as building over time due to a Protonic interaction
between two non powered metals, I observe it is what we would call an
over unity effect.
I do not
believe that it is motionless or has force without a vector, this would
seem unnatural. However this may be the nature of the Proton Aether
interacting with a reflective Electron Aether through the magnetic
field. Since it is setting at a higher density on the Protons end
whatever is happening is causing a change of the Protons Aether field
to form a spherical energy that is not the normal background level.
Whether this is altering the Protons Aether or the Electrons Aether, or
the Control or Perception fabrics is
not truly known. Until we see a gravity or time effect our opinions are
premature. A gravity effect would indicate a Proton Aether field, a
voltage effect would indicate an Electron Aether field, a magnetic
field effect would indicate possibly one or both. As we have never seen
this sphere shape appear in anything but an Electric or a
Gravity
field, I have high hopes that Gravity will be the potential we are
effecting.
The Protonic forces
It is hoped that with time all the Protonic forces will be clearly
identified and this list will grow with an understanding of how the
forces interact. However for now it is important to realize that when
dealing with Proton manipulation one must consider more then just the
Electric or Positive potential of the Proton. Wilbert Smith identified
12 dimensions, [see references below] or layers of forces in four
fabric groups of three each, all in
quadrature alignments. It is suggested that between the two forces of
Proton and Electron we may discover all 12 at some point. As we have
covered EM , as well as an introduction the the Perception and
Control fabrics, next is the not so well understood forces
and how they interact, the tempic vector and spin.
Torsion Spin:
Protonics converts torsion to a diamagnetic field
Torsion leads the diamagnetic field in real time
Increase of diamagnetic
force is a direct function of the motion placed on the magnetic field
Torsion or spin of momentum is critical to the Protons diamagnetic
coupling
because the largest mass of the atom is contained in the nucleus. As we
alter the angular direction that an external magnetic field crosses a
diamagnetic nucleus we get a delayed reaction. The magnets dropping
down the Aluminum tube show this delay. In Electronics it is noted that
in an inductor or transformer the current leads the voltage
by 90
degrees of the frequency applied.
This delay seems built into inductors and we have identified that it
may be coming from the mass of the Proton having to physically turn
into alignment with the external magnetic field moving through it. As
it turns it
generates an always opposing diamagnetic field from the
Coppers Proton layer.
Further in experiments with spinning diamagnetic materials like Copper
we observe another very important interaction. The Proton diamagnetic
layer is doing a conversion
of forces with a time
delay
built in. If we bring a magnet close to a stationary copper cylinder we
observe no forces worth noting. As we spin up the Copper cylinder we
observe an increasing diamagnetic field that seems to build with the
RPM. It always opposes any magnet in any arrangement of the poles.
That is, Protons magnetic fields are diamagnetic but the strength of
the field is coupled to motion. The important observation is that the diamagnetic field lags the
torsional motion that
caused it's conversion.
As we add more spin velocity to the cylinder the diamagnetic force
increases. This process requires the nucleus of the atom to alter it's
spin direction and causes a delay of the resulting diamagnetic field
build up. With spinning Copper cylinders the repelling force will extend
many inches out from the Copper.
Within this interaction of motion
and magnetic fields
we find a method
of increasing the
diamagnetic force available for interaction.
Searl disc revisited:
Another instance of diamagnetic regeneration.
In the Searl disc, once motion is present, it is this diamagnetic lag
or torsion leading the diamagnetic field conversion that may be causing
the parting side of the rollers and cylinder to push away harder then
the other side is resisting moving together. As the magnets and Copper
come together, the copper atoms must turn 1/4 turn down to align with
the opposing magnets, they begin to couple and
convert the
torsion of spin into a stronger diamagnetic field.
On the closing side of the rollers the Copper Protons are experiencing
a torsion, on the opening side of the rollers it has been
converted to diamagnetic repulsion which causes a stronger magnetic
push along that side. What ever the delay is, sets the diamagnetic
forces
slightly off centered between the roller and cylinder sustaining motion.
This would indicate another regenerative use of diamagnetism, as the
Protons field is not depleted or used up in the process.
The Copper layers of the roller and cylinder are two diamagnetic layers
interacting with opposing magnets. This conversion of torsion to a
stronger diamagnetic field with a built in lag time may be the key to
the Searl disc.
Generating a strong diamagnetic field:
Getting the diamagnetic field to emerge outwards from the atom will
offer a means to study it closer.
The Searl disc gives a clue for a device to study the diamagnetic
properties of the Proton in Copper, Aluminum, or Bismuth. Putting
torsion on the magnetic field cutting through a diamagnetic material
will cause the field to expand outwards with great force. It is hoped
that the conversion will also contain a time lag we can use to our
advantage. There are two methods immediately available. Spin
magnets past the diamagnetic surface, or set up a moving magnetic field
in a coil. The Searl disc uses only two fields at 90 degrees to one
another, so we can fabricate two coils around a diamagnetic substance
like Bismuth and study "power in / power out" for torquing the field by
90 degrees back and forth as it crosses another winding.
If we can offer a third coil setting somewhere between these two
directions then we can measure the diamagnetic field as it crosses and
monitor the field strength.
This can be done with pulses that are relatively short in duration but
long enough to turn the Protons. The information we need to discover is
whether there is more energy in the torsion producing nuclear movement
or more
energy in the diamagnetic field resulting from the torsion. This would
be the key to over unity in diamagnetic fields.
Once again we find ourselves wrapping coils around inductors to
discover this, or placing iron coils around inductive materials and
looking for an enlarged counter EMF. The Sweet setup may be one
possible method to study the effect in a
square or rectangular bismuth slab with coils on two surfaces to torque
the Proton field. The weave pattern Smith coil may also be used to tilt
a cylindrical
ring outwards, and then a normal wound coil outside it can be used to
snap it back vertical. The ferrite ring of the Vortex generator of Rain
Maker 1 can also be
used simply with a normal wound coil on the Bismuth slug, but magnets
will have to be sized to allow the 90 degree turn when the inner coil
is energized. The diamagnetic field should appear as the Protons turn,
but it should slightly lag the turn. It is a function of how fast they
turn and how strong the field is that turns them.
Dealing with Lenz law and the conventional model of diamagnetism
If we are to fully begin to manipulate the Protonic forces we need to overhaul some of the present models of magnetism.
While tracing the descriptions of diamagnetism backwards we end up at
the place where it all started. Lenz Law. The basic assumption that all
EM phenomena comes from the Electron shell and it's motions and has
nothing whatsoever to do with the Proton has to be realized as a mistake. Here is the conventional
statement of Diamagnetism as stated to be based on Lenz law.
[Georgia State University on hyper physics]
Diamagnetism
"The orbital motion of electrons creates tiny atomic current loops, which
produce magnetic fields. When an external magnetic field is applied to a
material, these current loops will tend to align in such a way as to oppose the
applied field. This may be viewed as an atomic version of Lenz Law:
induced magnetic fields tend to oppose the change which created them.
Materials in which this effect is the only magnetic response are called
diamagnetic. All materials are inherently diamagnetic, but if the atoms
have some net magnetic moment as in paramagnetic materials, or if there
is long-range ordering of atomic magnetic moments as in
ferromagnetic materials, these stronger effects are always
dominant. Diamagnetism is the residual magnetic behavior when materials
are neither paramagnetic nor ferromagnetic.
Any conductor will show a strong diamagnetic effect in the presence of
changing magnetic fields because circulating currents will be generated in the
conductor to oppose the magnetic field changes. A superconductor will be a perfect diamagnet since there
is no resistance to the forming of the current loops."
Lenz's Law
"When an emf is generated by a change in magnetic flux according to Faraday's Law, the polarity of the induced emf is such that it
produces a current whose magnetic field opposes the change which produces it.
The induced magnetic field inside any loop of wire always acts to keep the
magnetic flux in the loop constant. If the B field is
increasing, the induced field acts in opposition to it. If it is decreasing, the
induced field acts in the direction of the applied field to try to keep it
constant."
Lets examine the first statements of the definition of Diamagnetism:
"When an external magnetic field is applied to a
material, these current loops [Electron orbital motion] will tend to align in such a way as to oppose the
applied field"
Is this an accurate statement for the orbital motions of Electrons or Protons?
In NMR study we find that the alignment of the magnetic field of the Proton always takes on an alignment with the
external magnetic field, that is, it follows the external
field, aligns with it, and proceeds to precess around it. Whether
it opposes the field or aids the field is based
solely on the energy or photon absorption level of the Protons and has
nothing to do with the changing intensity of the field. The field intensity only determines the NMR frequency and not it's polarization.
Polarization is normally around 51% and this would cancel as a repulsive force.
Nuclear Magnetic Resonance
"a radio frequency signal of the proper frequency can induce a transition
between spin states. This "spin flip" places some of the spins in their higher
energy state"
Here we see from the universities description of NMR that the energy
state of the Proton determines whether the field opposes or aids the
external field.
The same is found to be true in ESR [Electron Spin Resonance]
technology, only operating at a microwave frequency. The orbital
motions of
the Electron always align with
the external magnetic field turning
either one of two possible directions. One is a high energy opposing
magnetic field and one is a like or attracting field. Whether the field
opposes or aids is a function of the energy state and is not always
consistent.
Does this support the classical definition of a diamagnetic field found above claiming that the external magnetic field
always produces an opposing field in the Electron orbital motion? Not even close! We find the ratio
normally around 51% at room temperature. While Lenz Law accurately
states the observed effects of Copper wire and Iron core magnetics, the definition of diamagnetic force it
is not correct as to the actual source of the force.
Now lets look closely at what is happening inside a CRT or standard old
fashions TV picture tube. Electrons in a vacuum which should be close to
a superconductor by the present models due to zero resistance. Here we
have a stream of free electrons in a
vacuum shooting at the front of the picture tube and accurately able to
focus onto a single dot. As we scan the beam using deflection coils
which are magnetic fields steering the free electrons do we see any
appearance of tiny current loops forming
in the beam which would cause the beam to spread out and defocus
because of opposing diamagnetic fields? Do we see any diamagnetic
fields popping up and creating a repelling
force or bending the steering deflection fields around them as the
definition of a superconductor indicates should be happening? The
influence of the
Protons is absent in this example and here we observe the main
difference. Electrons of themselves do not create the diamagnetic field.
Further we read "A superconductor will be a perfect diamagnet since there
is no resistance to the forming of the current loops"
This statement would lead one to the erroneous assumption that the orbital path of an Electron has resistance to begin with.
The extreme low temperature removes the vibrations of heat from the
whole atom. As the Electron and Proton fields are tightly linked this
must effect them both.
It is not logical to pretend the Electron shell is disconnected from
the Proton shell and therefore must be the source of diamagnetism.
If it were possible to create a strong diamagnetic field using only Electron
motions then we should be able to wind a coil to simulate these motions
and produce a field that would oppose all magnets brought near it from
all angles. The only method we find practical is by using the
diamagnetic elements, and these are the ones with a high nuclear Proton magnetic moment and a low Electron magnetic moment.
I would purpose merely that we have miscalculated the source of the
diamagnetic force as being the Electron layer of the atom, and the definition of the Diamagnetic field may need revision as it totally ignores the Protons interaction.
Where do we find a repelling EM force in the atom matching diamagnetism?
EM is the dominant force in operation outside the strong force area of the atom which is found setting only at the nucleus.
The only place we find a repelling force acting like a diamagnet inside
the atom is at the nucleus which repels all the electron shells
outwards.
This model explains why this force is present in all atoms, as well as why electrons do not crash into the nucleus.
For the above reasons I believe that diamagnetism originates at the
nucleus of the atom and is actually an interaction between the Proton
and Electron shells.
The Proton shell is more massive, and as it is also spinning it resists
turning it's field. The field swing lags the external applied field and
this is where we find the longitudinal waves being modulated within the
atom as well as the source of induction or opposing force to a moving
magnetic field. As the Proton magnetic field swings into alignment with
the external field applied we see an NMR trace giving us a one dimensional voltage differential of a 3 dimensional spiraling motion.
The Protonic field follows a spiral path
As we knock the Protons out of magnetic alignment by altering the
external magnetic field at an impulse rate faster then they can quickly
turn because of their higher weight, they take on a spiraling path into
a new precession angle based on the NMR frequency. Tesla's spiral
antenna sets them up to radiate the "T wave" which he clocked at faster
then light speeds. Protonics will have to prove this at every step,
inch by inch.
Experiment in Protonic propagation
This experiment is offered as a ground breaking introduction to Tesla's
claim of a faster then Light wave resulting from high
frequency pulsing of a spiral type antenna coil connected between ground and
an elevated spherical ball.
Two of these may be constructed at a great distance from one another.
As well as two normal dipole antennas must be constructed at the same
locations.
The two stations must have dual transmitters and receivers on each system keyed off the same circuit.
The frequency selected should be higher then the NMR rate for the
copper in the spiral coil such that the Protons do not have time to
follow the magnetic field.
In lue of this they could be generated using extremely sharp square
waves with a fast rise time in the Tesla antennas. Spark gaps should
not be necessary.
At each location a dual trace scope shall record the time delay between
"key on" and energy pulse hitting both antennas to check for
syncronization through the equipment.
With one station transmitting a slow string of pulses on both systems,
the other station will monitor the pulses on both receiving systems and
determine, using a dual trace scope, if there is a time differential
between them.
The distance between the two stations must be accurately determined.
This should reflect a normal light speed propagation over the normal
dipole antennas.
If the propagation velocity of the longitudinal system is truly higher then it will be quite obvious on the scope trace.
Only in the face of empirical measurements will the field of alternate energy and Protonics become more main stream.
Only with two stations at a great distance can we accurately clock
the time differential so that no other explanations can refute the
evidence.
Only with a comparison of the two wave forms on one dual trace scope can we accurately measure the time differential.
Only with a solid theory or model offered will anyone accept this is not a fabrication or a mistake.
This one experiment, if successful, would shake the physics world, as
now with a reasonable model to support why it happens, faster then
light energy transfer could no longer be ignored, and the basic difference between Hertzian and Tesla waves verified.
The resulting data would then offer us a formula for the design of devices that my use both types of energy to interact with one another, as happens in atoms.
References
[Wilbert Smith]
I have listed the fabrics
and quadrature aspects
of each for a reference:
Space Fabric:
Length
Area
Volume
Field Fabric:
Tempic Field [Change / Gradient / Spin]
Electric Field
[Divergence]
Magnetic Field
[Curl / Deviation of Reality]
Control
fabric:
Randomness Orientation
Decision Free Will
Ordered Sequence - Specific Arrangement
Perception fabric:
Form [Boundary of Reality]
Multiplicity
Assembly [Purposeful Structure, Animate / Inanimate]
David Lowrance
c_s_s_p group
7 - 25 - 2006
Home